Z/Panel
For Blues Jr.

Are you tired of struggling with the controls on your Chrome Panel Blues Jr
in the dim light of your practice room, studio or on stage?
This is the solution.
Our Z/Panel takes the difficult to see rear facing white on chrome panel and
reverses the labels to front facing high contrast white lettering on black.
Our durable laminated vinyl overlay is attached to quality aluminum angle stock.
Installation takes just a couple of minutes and
is completely reversible at any time.

See BEFORE and AFTER photos below.
****Installation Instructions****
"DANGER" Do not touch anything inside chassis while back
is removed. Dangerous High Voltage may be present!

  1. Remove the six screws on the rear panel, remove panel.

  2. Loosen the screw on each SIDE of amp a few turns.

  3. Loosen the two screws on the TOP of the amp a few turns.

  4. Insert the Z/Panel over the existing control labels.

  5. Align the cutout on the Z/Panel with the center screw hole.

  6. Snug up the two screws on the TOP of the amp (don't over tighten).

  7. Snug up the screw on each SIDE of the amp (don't over tighten).

  8. Finally, reinstall back panel with the six screws.

Price $14.99 + shipping

Available on EBAY

Search for-- Blues Jr Control Panel Overlay

Click Here to Contact Us by E-MAIL

GeorgeK~ 2014 ~