Using the 1/2 inch Comb

USING THE 1/2-INCH COMB
The 1/2-inch Comb can only be used with the No. 10 Blade.

TO ATTACH THE COMB:

With the Blade installed, turn the Clipper over so you are looking at the Blade from the bottom.

Slide the Comb clips under the bottom of the Blade.

Place your thumb under the bottom center of the Comb and push the Comb upwards until it snaps into place.

Remove Comb by reversing the installation instructions.

Clippers should be cleaned and oiled after each use, and oiled frequently during use.

See Instruction Booklet for how to clean and oil.